2021 China New Design Dth Drill Pipe - Reverse Circulation Drilling Hammer Bit – TDS

Short Description:

Message Email

Product Detail

Product Tags

Feedback (2)

We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for Drilling Rig For Water Well, Down The Hole Hammer Bits, Solar Panel Installation Rig Factory, We are going to do our greatest to satisfy or exceed customers' prerequisites with excellent goods, advanced concept, and economical and timely company. We welcome all clients.

2021 China New Design Dth Drill Pipe - Reverse Circulation Drilling Hammer Bit – TDS Detail:

RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.

The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained.

The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit.

TDS RC hammer Model
Hammer Model	Hole Range (mm)	External Diameter (mm)	Weight(without bit) mm	Bit shank	Working Pressure	Connection Thread
RC4108	115-130	108	78	RE410	1.5-3.0 Mpa	REMET 3.1/2″-4″ METZKE 3.1/2″
RC5116	120-135	116	85	RE543	1.5-3.0 Mpa	REMET4″ METZKE 4″
RC5121	136-133	121	73	RE512	1.5-3.0 Mpa	REMET 4″-4.1/2″ METZKE4″-4.1″
RC5126	140-152	126	95	RE5126	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″
RC5130	140-146	130	82	RE513	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″

Product detail pictures:

Related Product Guide:

Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for 2021 China New Design Dth Drill Pipe - Reverse Circulation Drilling Hammer Bit – TDS , The product will supply to all over the world, such as: Senegal, Manila, New Delhi, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.

Black Diamond Rc Hammers