2021 Latest Design Air Compressor For Drilling - Reverse Circulation Drilling Hammer Bit – TDS

Short Description:

Message Email

Product Detail

Product Tags

Feedback (2)

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Water Well Drilling Rig Factory, Well Drilling Rod, Blast Hole Drilling Machine, sincerity and strength ,always keep approved good quanlity ,welcome to our factoty for visit and instruction and business.

2021 Latest Design Air Compressor For Drilling - Reverse Circulation Drilling Hammer Bit – TDS Detail:

RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.

The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained.

The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit.

TDS RC hammer Model
Hammer Model	Hole Range (mm)	External Diameter (mm)	Weight(without bit) mm	Bit shank	Working Pressure	Connection Thread
RC4108	115-130	108	78	RE410	1.5-3.0 Mpa	REMET 3.1/2″-4″ METZKE 3.1/2″
RC5116	120-135	116	85	RE543	1.5-3.0 Mpa	REMET4″ METZKE 4″
RC5121	136-133	121	73	RE512	1.5-3.0 Mpa	REMET 4″-4.1/2″ METZKE4″-4.1″
RC5126	140-152	126	95	RE5126	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″
RC5130	140-146	130	82	RE513	1.5-3.0 Mpa	REMET 4.1/2″ METZKE 4.1″

Product detail pictures:

Related Product Guide:

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for 2021 Latest Design Air Compressor For Drilling - Reverse Circulation Drilling Hammer Bit – TDS , The product will supply to all over the world, such as: Orlando, Turkey, Mauritania, Our staffs are rich in experience and trained strictly, with qualified knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to deliver the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we'll develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.

Double Wall Drill Rod

Down The Hole Hammer Factories

Drill Steel

Dth Drill Bits

Electric Screw Air Compressor

Electric Screw Compressor

Ingersoll Rand Air Compressor

T51 Rod

Water Drill Rig

This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!