Cheap price 4 Dth Hammer - Reverse Circulation Drilling Hammer Bit – TDS
Cheap price 4 Dth Hammer - Reverse Circulation Drilling Hammer Bit – TDS Detail:
RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.
The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained.
The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit.
| TDS RC hammer Model | ||||||
| Hammer Model | Hole Range (mm) | External Diameter (mm) | Weight(without bit) mm | Bit shank | Working Pressure | Connection Thread |
| RC4108 | 115-130 | 108 | 78 | RE410 | 1.5-3.0 Mpa | REMET 3.1/2″-4″ METZKE 3.1/2″ |
| RC5116 | 120-135 | 116 | 85 | RE543 | 1.5-3.0 Mpa | REMET4″ METZKE 4″ |
| RC5121 | 136-133 | 121 | 73 | RE512 | 1.5-3.0 Mpa | REMET 4″-4.1/2″ METZKE4″-4.1″ |
| RC5126 | 140-152 | 126 | 95 | RE5126 | 1.5-3.0 Mpa | REMET 4.1/2″ METZKE 4.1″ |
| RC5130 | 140-146 | 130 | 82 | RE513 | 1.5-3.0 Mpa | REMET 4.1/2″ METZKE 4.1″ |
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and excellent excellent management throughout all stages of creation enables us to guarantee total buyer satisfaction for Cheap price 4 Dth Hammer - Reverse Circulation Drilling Hammer Bit – TDS , The product will supply to all over the world, such as: Kyrgyzstan, Brunei, Paris, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Darlene from British - 2018.10.31 10:02
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Joa from Victoria - 2018.02.08 16:45
