factory Outlets for Kompressor - PDC Bit – TDS
factory Outlets for Kompressor - PDC Bit – TDS Detail:
Feature of PDC bit
1, Suit for drilling medium to medium-hard formations.
2, Evolute asymmetrical blade cutter design and balanced bit load so that bit whirl is prevented.
3, Composite gage protection and low torque design improve rate of penetration.
4, CFD hydraulic balance design results in better bit cleaning and cutting removal .
5, Combined utilization of high performance PDC compacts significantly prolongs bit life
6, Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allows for higher flow rates with minimal increase in pump pressure.
Feature: Diamonds are impregnated in the matrix behind the PDC cutters
Benefit: Increased footage drilled in abrasive applications
|
Bit Type
|
6”
|
8-1/2”
|
8-1/2”
|
12-1/4”
|
Bit Type
|
17-1/2” GM1606T
|
|
IADC Code
|
M423
|
M432M332
|
M323
|
M432 M332
|
IADC Code
|
M323
|
|
Blade
|
5
|
6
|
8
|
6
|
Blade
|
6
|
|
Cutter Size (mm)
|
Φ13
MM
|
Φ16
MM
|
Φ13
MM
|
Φ16MM
|
Cutter Size (mm)
|
Φ16MM；Φ13MM
|
|
Nozzle Qty/Type
|
5
|
13.2
|
9.6
|
30.78
|
Cutter Qty
|
Φ16×58；Φ13×81
|
|
Nozzle Qty/Type
|
3NZ
|
6NZ
|
4NZ
|
6NZ
|
Nozzle Qty/Type
|
8NZ
|
|
Gauge Length
|
1.5”
|
2.2”
|
2”
|
2.5”
|
Gauge Length (mm)
|
110
|
|
Connection
|
3-1/2” API REG
|
4-1/2” API REG
|
4-1/2” API REG
|
6-5/8” API REG
|
Connection
|
7-5/8” API REG
|
|
Make up Torque(KN.m)
|
10.4~11.4
|
24.1~26.5
|
24.1~26.5
|
51.7~56.9
|
N.W./ G.W.(KG)
|
338/388
|
|
Rotary Speed(rpm）
|
60-260
|
60-260
|
60-260
|
60-260
|
Nozzle Size (inch)
|
10/32
|
|
Weight on Bit(KN)
|
8-50
|
20-100
|
20-100
|
30-140
|
Rotary Speed(Rpm)
|
60-260
|
|
Max.WOB(KN)
|
90
|
130
|
130
|
180
|
Weight On Bit(KN)
|
30-200
|
|
Flow Rate（lps)
|
10-30
|
22-35
|
22-35
|
38-70
|
Max.WOB (KN)
|
240
|
|
Flow Rate（lps)
|
45-80
|
|||||
|
Above are regular sizes for your reference. Size can be customized as per your requirement.
|
||||||
Product detail pictures:
Related Product Guide:
We have state-of-the-art equipment. Our products are exported for the USA, the UK and so on, enjoying a fantastic status among the clients for factory Outlets for Kompressor - PDC Bit – TDS , The product will supply to all over the world, such as: Portland, Cambodia, Rio de Janeiro, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
By Victor Yanushkevich from Hanover - 2017.12.09 14:01
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Belinda from Sydney - 2018.07.12 12:19
