Factory wholesale Down The Hole Hammer Manufacturers - Casing Advancing Systems ODEX 140 – TDS
Factory wholesale Down The Hole Hammer Manufacturers - Casing Advancing Systems ODEX 140 – TDS Detail:
Eccentric casing drilling system is today’s preferred method for drilling in difficult ground conditions, for example, where there are boulders or loose formations.EDS is the most economical solutions because its ingenious reaming wing the bit is retrievable can be used at the next hole. This is particularly design for shallow holes, as is often the case in water well drilling, geothermal wells and for shallow micro-piling work. EDS is ideal for short holes in consolidated overburden. The component of Eccentric system consists of Pilot bits, Reamer bits, Guide device and casing shoe.
When drilling, the reamer bit will rotate out to enlarge the hole which enough for the casing tube slide down behind the reamer. When reached required depth, the drill pipe will drill to the reverse direction and the reamer bit will retract, it is allowing the whole drilling system to pass through the casing.
The below size of Eccentric systems which are available, and the special design is upon customer’s requirement:
Eccentric 90, Eccentric 114, Eccentric 140, Eccentric 165, Eccentric 190 and Eccentric 240
Application
- Geothermal well drilling
- Water well drilling
- Pipe roofing(umbrella arch drilling)
- Foundation work
- Anchoring
Specifications
A | B | C | D | E | F |
Outer Dia. of Casing Tube | Inner Dia. of Casing Tube | Reamed Dia. | Min. Inner Dia.of Casing Shoe | Hammer Type | Drill Pipes |
mm | mm | mm | mm | mm | |
108 | 93-99 | 118 | 86 | TDS79 | 76 |
114 | 101-103 | 127 | 91 | R56,T38,TDS79 | 76 |
127 | 114-116 | 136 | 101 | TDS79 | 76 |
140 | 124-127 | 152 | 117 | TDS98 | 76 |
146 | 127-132 | 154 | 117 | TDS98 | 76 |
168 | 149-155 | 184 | 140 | TDS122 | 76,89 |
178 | 159-165 | 194 | 150 | TDS122 | 76,89 |
193 | 173-180 | 206 | 166 | TDS139 | 89,114 |
219 | 199-206 | 234 | 193 | TDS139,TDS180 | 89,114 |
245 | 224-231 | 260 | 210 | TDS180,TDS220 | 114 |
273 | 251-257 | 300 | 241 | TDS180 |
114,127 |
Usage:
1. In not stable rock formation, the casing is necessary to follow.
2. Usually in water well drilling, for large hole boring.
3. Drilling depth is better less than 40 metres to control the hole well.
4. Match to 6″ hammer and 194mm casing tube.
5. Air pressure is 20 Bar and air volumn is 500 cfm.
6. The tools is fetched out to use in the next holes.
Product detail pictures:
Related Product Guide:
We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for Factory wholesale Down The Hole Hammer Manufacturers - Casing Advancing Systems ODEX 140 – TDS , The product will supply to all over the world, such as: Argentina, Sydney, Zimbabwe, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.
By Elma from Brazil - 2017.06.22 12:49
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Nicole from St. Petersburg - 2018.06.05 13:10