1. All operators and maintenance personnel who are preparing to operate and repair drilling rigs must read and understand preventive measures, and be able to identify various situations.
2. When the operator approaches the drilling rig, he must wear a safety helmet, protective glasses, mask, ear protection, safety shoes and dust-proof overalls.
3. Before repairing the drilling rig, the main intake pipe and main air valve must first be closed.
4. Check and keep all nuts and screws, do not loose, all hoses are connected reliably, and pay attention to protecting the hoses to prevent them from breaking.
5. Keep the workplace clean to prevent collapse.Keep your hands, arms, and eyes away from moving parts to avoid accidental injuries.
6. When the walking motor starts, pay attention to the forward and backward speeds of the drilling rig.When towing and towing, do not stop and walk between the two machines.
7. Ensure that the drilling rig is well lubricated and repaired in time. Pay attention to the position of the oil mark when working. Before opening the oil mist device, the main air valve must be closed and the compressed air in the drilling rig pipeline must be released.
8. When parts are damaged, the drilling rig shall not be forcibly used.
9. Make careful adjustments to the drilling rig during work. Before supplying air, the main air duct and the drilling rig must be tied together with a safety rope.
10. When the drilling rig shifts, adjust the carriage to the transport bracket.
11. When the drilling rig is disabled, blow the surface powder clean and place it in a safe area to prevent damage to parts.
Post time: Nov-21-2022