Rapid Delivery for Tci Bit - Vermeer DitchWitch HDD Drill Rod & Pipe for Directional Drilling – TDS

Short Description:

Message Email

Product Detail

Product Tags

Feedback (2)

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Stabilizer, Taper Button Bits, Rock Drill Pipe, We are going to provide most effective quality, quite possibly the most current market aggressive rate, for each and every new and outdated consumers with the most great environmentally friendly solutions.

Rapid Delivery for Tci Bit - Vermeer DitchWitch HDD Drill Rod & Pipe for Directional Drilling – TDS Detail:

1-Piece Internal & External (IEU) Forged Drill Pipe

Our IEU integral forged or 1-Piece forged drill pipe is made up solely from one piece of material. The pipe has the same chemical makeup for the threaded connections and the mid-body tube with no weld zone between them.

Inertia Welded Drill Pipe

Our inertia welded drill pipe is made from three separate pieces that include the mid-body tube and two threaded connections or tool joints. The interim weld process is a solid-state welding technique that forges metal together without causing a melt to occur. Because there is no melt product produced during the inertia weld, there is no recast metal or grain enlargement.

Specificationå¯¼èªæ

Compatible with Vermeer HDD Rigs

Rig Compatibility*	Thread	Length		Pipe OD		Joint OD		Pin Length (mm)	Max. Torque (Nm)
Rig Compatibility*	Thread	mm	ft	mm	inch	mm	inch	Pin Length (mm)	Max. Torque (Nm)
D7x11, D10x15	#200	1,829	6	42	1.66	48	1.88	50.7	2,040
D20x22, D23x30	#400	3,048	10	52	2.06	57	2.25	63.5	3,525
D24x40	#600	3,048	10	60	2.38	67	2.63	63.5	5,695
D33x44, D36x50	#650	3,048	10	60	2.38	70	2.75	63.5	6,800
D33x44, D36x50	#650	4,572	15	60	2.38	70	2.75	63.5	6,800
D36x50, D40x55	#700	3,048	10	67	2.63	79	3.1	76.2	7,457
D36x50, D40x55	#700	4,572	15	67	2.63	79	3.1	76.2	7,457
D50x100, D60x90	#900	3,048	10	73	2.88	83	3.25	88.9	12,202
D50x100, D60x90	#900	4,572	15	73	2.88	83	3.25	88.9	12,202

Compatible with Ditch Witch HDD Rigs

Rig Compatibility*	Thread	Length		Pipe OD		Joint OD		Pin Length (mm)	Max. Torque (Nm)
Rig Compatibility*	Thread	mm	ft	mm	inch	mm	inch	Pin Length (mm)	Max. Torque (Nm)
JT2720	1.94	3000	9.84	60	2.38	70	2.75	75	4340
JT20	1.94	3000	9.84	52	2.06	67	2.63	75	2980
JT2720M1, JT3020M1	2.11	3000	9.84	60	2.38	76.2	3	84.7	5420
JT25/30	2.11	3000	9.84	60	2.38	70	2.75	84.7	5420
JT4020	2.4	4500	14.76	73	2.88	82	3.23	99.5	6800
JT4020M1	2.59	4500	14.76	76	3	89	3.5	91.5	6800
JT7020M1, JT8020M1, JT100M1	3.27	4500	14.76	89	3.5	102	4	132.5	13,560

Product detail pictures:

Related Product Guide:

We are proud of the superior customer gratification and wide acceptance due to our persistent pursuit of top of the range both of those on merchandise and service for Rapid Delivery for Tci Bit - Vermeer DitchWitch HDD Drill Rod & Pipe for Directional Drilling – TDS , The product will supply to all over the world, such as: London, Serbia, Poland, Custom orders are acceptable with different quality grade and customer's especial design. We are looking forward to establish the good and successful cooperation in business with long terms from the customers of all over the world.

Ballistic Button Bit

Breakout Tong

Dth Hammer Drill Rod

Fixed Air Compressor

Mining Drilling Rig

Reverse Circulation Bits

Solar Pile Driving Equipment

Sullair Air Compressor

Tricone Bit

Water Drilling Rig

Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.