Steel Tooth Rotary Drill Bit

Short Description:

The Advantages of Using a Tri Cone Over Other Drill Bits

1)There is a Tri Cone suitable for any rock formation

2) Tricone bit is versatile and can handle changing formations

3)Tri Cones are reasonably priced, long lasting and have an efficient drilling rate

4)Tricone is that the roller cones have high end sealed bearings; extremely high quality tungsten carbide and diamond gauge protection throughout the drill bit as well as skirt tail hard facing and optimized hydraulics. These roller cone drill bits aredesigned to go to extreme depths in extreme conditions and in situations where they cannot fail.

Message Email

Product Detail

Product Tags

Tricone bit is an important tool for oil drilling, its work performance will directly affect the quality of drilling, drilling efficiency and drilling costs. Oil drilling and geological drilling is the most used or cone bit. The cone bit has the effect of rocking, crushing and shearing the formation rock in rotation, so the cone bit can be adapted to soft, medium and hard layers. Especially in the jet cone bit and long nozzle after the emergence of cone bit, the cone drill bit drilling speed greatly improved, is the history of the development of cone bit a major revolution. The cone bit can be divided into teeth (tooth) by tooth type, tooth (bit) (tooth set inlaid with carbide teeth) cone bit; according to the number of teeth can be divided into single cone, double , Three-cone and multi-cone bit. At home and abroad use the most, the most common is the Tricone bit.

SPECIFICATIONS
IADC	WOB(KN/mm)	RPM(r/min)	Applicable Formations
417/427	0.3-0.9	150-70	very Soft formation with low compressive strength and high drillability,such as clay,soft mudstone,shale,salt,loose sands,etc.
437/447	0.35-0.9	150-70	very Soft formation with low compressive strength and high drillability,such as clay,soft mudstone,shale,salt,loose sands,etc.
515/525	0.35-0.9	180-60	very Soft formation with low compressive strength and high drillability,such as mudstone,salt,soft limestone, sands,etc.
517/527	0.35-1.0	140-50	Soft formation with low compressive strength and high drillability,such as mudstone,salt,soft limestone,sands,etc
535/545	0.35-1.0	150-60	medium soft with harder formation, more abrasive streaks,such as hard shale,mudstone,soft limestone,etc.
537/547	0.4-1.0	120-40	medium soft with harder formation, more abrasive streaks,such as hard shale,mudstone,soft limestone,etc.
617/627	0.45-1.1	90-50	medium hard with higher compressive strength as well as thick and hard streaks,such as hard shale,sands,limestone,dolomite,etc.
637	0.5-1.2	80-40	medium hard with higher compressive strength as well as thick and hard streaks,such as hard shale,sands,limestone,dolomite,etc.
737	0.7-1.2	70-40	Hard with high abrasiveness such as hard limestone,dolomite,firm sands,etc
827/837	0.7-1.2	70-40	very hard with high abrasiveness,such as quartzite,quaruzite sand,chert,basalt,granite,etc.