TCI Tricone Bit

Short Description:

Our tricone bit is from high manganese steel and carbide, can be used for geological prospecting, development of oil and gas, drilling water wells,blast holes and making holes for seismic prospecting,construction engineering. Now there are eleven common types of tricone rock bits.

Steel teeth series:IADC CODE:116,117,126,127,136,137,216,217,317,337,

TCI series:IADC CODE:417,437,447,517,527,537,547,617,627,637,647,737,837.

Message Email

Product Detail

Product Tags

Tricone bit is an important tool for oil drilling, its work performance will directly affect the quality of drilling, drilling efficiency and drilling costs. Oil drilling and geological drilling is the most used or cone bit. The cone bit has the effect of rocking, crushing and shearing the formation rock in rotation, so the cone bit can be adapted to soft, medium and hard layers. Especially in the jet cone bit and long nozzle after the emergence of cone bit, the cone drill bit drilling speed greatly improved, is the history of the development of cone bit a major revolution. The cone bit can be divided into teeth (tooth) by tooth type, tooth (bit) (tooth set inlaid with carbide teeth) cone bit; according to the number of teeth can be divided into single cone, double , Three-cone and multi-cone bit. At home and abroad use the most, the most common is the Tricone bit.

SPECIFICATIONS
IADC	WOB(KN/mm)	RPM(r/min)	Applicable Formations
417/427	0.3-0.9	150-70	very Soft formation with low compressive strength and high drillability,such as clay,soft mudstone,shale,salt,loose sands,etc.
437/447	0.35-0.9	150-70	very Soft formation with low compressive strength and high drillability,such as clay,soft mudstone,shale,salt,loose sands,etc.
515/525	0.35-0.9	180-60	very Soft formation with low compressive strength and high drillability,such as mudstone,salt,soft limestone, sands,etc.
517/527	0.35-1.0	140-50	Soft formation with low compressive strength and high drillability,such as mudstone,salt,soft limestone,sands,etc
535/545	0.35-1.0	150-60	medium soft with harder formation, more abrasive streaks,such as hard shale,mudstone,soft limestone,etc.
537/547	0.4-1.0	120-40	medium soft with harder formation, more abrasive streaks,such as hard shale,mudstone,soft limestone,etc.
617/627	0.45-1.1	90-50	medium hard with higher compressive strength as well as thick and hard streaks,such as hard shale,sands,limestone,dolomite,etc.
637	0.5-1.2	80-40	medium hard with higher compressive strength as well as thick and hard streaks,such as hard shale,sands,limestone,dolomite,etc.
737	0.7-1.2	70-40	Hard with high abrasiveness such as hard limestone,dolomite,firm sands,etc
827/837	0.7-1.2	70-40	very hard with high abrasiveness,such as quartzite,quaruzite sand,chert,basalt,granite,etc.